| Creating a bootable USB Boot / Flash Disk Bootable _________________________________________ | | |
Most of the motherboard and video card manufacturers nowadays offer Windows based software for flashing your hardware (updating BIOS), but it is well known, that flashing in DOS environment is way safer than in Windows.
In the old times there was no problem in creating a bootable device, since every computer had a floppy drive and Windows had a special option for creating a bootable floppy. Now we are living in a world of USB thumb drives and flashing your hardware from a bootable thumb drive is the easiest way. The only problem is making the USB drive bootable and aim of this guide is to learn you how to do it.Before we begin, you have to DOWNLOAD FILE IN END OF TOPIC extract it somewhere on your hard drive. After that just follow these steps:
- Run HP bootable media.exe and install it by following the pictures below.
- Once you have successfully installed the program, please run it (HP USB Disk Storage Format Tool - in Windows Vista you should click on it with right mouse button and select "Run as Administrator" to avoid any problems). There you have to tick "Quick format" and "Create DOS startup disk", selecting "using DOS files located at" like in the picture below. Click on the three dots button and guide the program to the location on your hard drive, where you have extracted *.zip archive. Select the "DOS files" folder and click OK. All you have to do now is click on "Start" button. Because you are formatting your USB thumb drive, program will warn you, that you are about to erase all data from it. By clicking "Yes", all the data on your thumb drive will be lost, so you better back it up before proceeding.
Dowload Here
Alternate All Boot File Is Here
Download Here
No comments:
Post a Comment